IP & Password Modem ADSL
No... Merk................ IP................. User Name.... Password......
1 Alcatel 192.168.1.1 admin admin
2 Allied Telesyn 192.168.1.1 manager friend
3 Asus 192.168.1.1 admin admin
4 Aztech 192.168.1.1 admin admin
5 Billion 192.168.1.254 admin admin
6 Comtrend 192.168.1.1 root 12345
7 CTC 192.168.1.1 root root
8 CTC ATU-R 140 192.168.1.1 Admin Admin
9 Dare Global 192.168.1.1 admin password
10 Digy Boy 192.168.1.1 root root
11 D-LINK 192.168.1.1 admin admin
12 Enzer 192.168.1.1 dsl dsl
13 Huawai 192.168.1.1 admin admin
14 Level One 192.168.1.1 admin admin
15 Link Sys 192.168.1.1 admin admin
16 Prolink 10.0.0.2 admin password
17 PTI 10.0.0.2 admin epicrouter
18 Shiro 192.168.1.1 admin admin
19 Siemens 192.168.254.254 admin admin
20 SMC 192.168.2.1 admin smcadmin
21 Tecom 192.168.1.1 admin admin
22 TP-Link 192.168.1.1 admin admin
23 Vigor 192.168.1.1
24 ZTE 192.168.1.1 admin admin
25 Zyxel 192.168.1.1 1234

Adsl Modem TECOM
Tecom
AR1031
Default ip: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced Setup
2. Click WAN
3. Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot
Setting PPPoE
1. Click Advanced Setup
2. Click WAN
3. Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: (nmrspeedy@telkom.net); PPP Password: (password from Provider);
PPPoE Service Name: Speedy, Next
7. Cheklist Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot

Adsl Modem Makronet
Makronet
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced Setup
2. Click WAN
3. Click Add
4. ATM PVC Configuration, PORT=0, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Centang Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot
Setting PPPoE/Router
1. Click Advanced Setup
2. Click WAN
3. Click Add
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: (nmrspeedy@telkom.net); PPP Password: (password from provider);
PPPoE Service Name: Speedy, Cheklist Enable Fullcone NAT, Cheklist Bridge PPPoE Frames
Between WAN and Local Ports (Default Enabled), Next
7. cheklist Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot

Adsl Modem Billion
1.Login To : http ://192.168.1.254
2.User name = admin
Password = password
Click -> OK
3.Click : Quick Start
4.Edit Connection :
Encapsulation = PPPoE LLC
Bridge = Enabled
Setting VPI = 8 dan VCI = 81 , and Than
Static IP Setting
IP Address = 0.0.0.0
subnet mask = 0.0.0.0
Gateway = 0.0.0.0
5.Click : - Submit
- SAVE CONFIG
6.Click : Submit
7.Wait Till process Configuration done !
8.Configuration Done !
Now try to Browse..!

Adsl Modem SMC
Default IP: 192.168.2.1
Default password: smcadmin
Setting Bridge
1. Click WAN
2. Clik ATM PVC
3. Click VC1
4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR,
PCR/SCR/MBS: 4000/4000/10
5. Click Save Settings
Setting PPPoE
1. Click WAN
2. Click ATM PVC
3. Click VC1
4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS:
4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type:
Always Connected, Idle Time (Minute): 5, Username: (nmrspeedy@telkom.net), Password: (password
From Provider), Confirm Password: , MTU: 1492
5. Save Settings
SMC

Modem Prolink
1.Login To -> http :// 10.0.0.2
User Name : admin
Password : password
Click . . . . OK
2.Chose Configurasi WAN :
3.Select Adapter : Pilih Pvc3 (Indonesia)
4.Edit Field :
Bridge = Enable
Encapsulation = 1483 Bridge IP LLC
ATM VPI = 8
ATM VCI = 81
5.Static IP Setting : " just blank "
IP Address = just empty
Subnet Mask = just empty
Gateway = just empty
User Name = username@telkom.com . . . . . . ( optional ) **
Password = xxxxxxxx . . . . . . . . . . . . . . . . .( optional ) **
**If you choose to put username & password there just double clik explorer
**If you not choose to put username & password there you have to create new connection at Network
Connection
6.Create New Connection (Bridge) See here ..>>
7.Than Next :
* Click Submit
* Click Save Configuration
Next : Save Reboot ....

Adsl Modem Linksys
Linksys
AM300
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Setup
2. Click Basic Setup
3. ADSL Settings, Encapsulation: RFC 1483 Bridged, Autodetect: Disable, VPI: 8, VCI: 81,
Multiplexing: LLC, DSL Modulation: Auto
4. Click Save Settings
Setting PPPoE/Router
1. Click Setup
2. Click Basic Setup
3. ADSL Settings, Encapsulation: RFC 2516 PPPoE, Autodetect: Disable, VPI: 8, VCI: 81,
Multiplexing: LLC, DSL Modulation: Auto
4. PPPoE Settings: Username: (nmrspeedy@telkom.net), Password: (password From provider), Keep
Alive
5. Click Save Setting